Flow control valves
Overwiev
We offer different flow control valves to control the flow of the air in the system. The most common applications control the cylinder speed, delay the signal for the next intervention.
Features
We offer in-line flow control valves. This type of valve can be built to the inlet of the controlled element, but can also be built into a control panel. Typically used the cylinder speed controlling and for delay of the signal.
- needle-type
- AL body
- brass needle
- NBR seals
- Threaded port M5, G1/8, G1/4, G3/8, G1/2
- Operating pressure 1 ÷ 10 bar
- Operating temperature 0 ÷ 80 °C
We offer banjo flow control regulators without fitting. The operation of the flow control could be unidirectional or bidirectional. The regulators can built-in with thread, but for the other connection have to order a fitting separately. These could be thread connection, tube connection, or silencer ring. Can be controlled by the flow just to the inlet or just to the outlet or to both directions. Can be built into the cylinder or into the valve.
- needle-type
- unidirectional and bidirectional controller
- body and regulation screw: M5 = stainless steel; 1/8, 1/4, 3/8, 1/2 = OT58
- NBR seals
- Threaded port M5, G1/8, G1/4, G3/8, G1/2
- Operating pressure 1 ÷ 10 bar
- Operating temperature 0 ÷ 80 °C
We offer banjo flow control regulators with metal fitting. The operation of the flow control could be unidirectional or bidirectional. The regulators can be built-in with thread, the fittings could be push-in or threaded versions. Can be controlled by the flow just to the inlet or just to the outlet or to both directions. Can be built into the cylinder or into the valve.
- needle-type
- unidirectional and bidirectional controller
- body and regulation screw: M5 = stainless steel; 1/8, 1/4, 1/2 = OT58
- NBR seals
- Threaded port M5, G1/8, G1/4, G1/2
- Tube connections 3, 4, 6, 8, 10
- Operating pressure 1 ÷ 10 bar
- Operating temperature 0 ÷ 80 °C
We offer banjo flow control regulators with a plastic fitting. The operation of the flow control could be unidirectional or bidirectional. The regulators can be built-in with thread, the plastic fitting push-in version. Can be controlled by the flow just to the inlet or just to the outlet or to both directions. Can be built into the cylinder or into the valve.
- needle-type
- unidirectional and bidirectional controller
- body and regulation screw: M5, 1/8, 1/4, 3/8, 1/2 = OT58
- banjo fittings technopolymer
- NBR seals
- Threaded port M5, G1/8, G1/4, G1/2
- Tube connections 4, 6, 8, 10, 12
- Operating pressure 1 ÷ 10 bar
- > Operating temperature 0 ÷ 60 °C
We offer flow control valves with silencers. These valves could control the speed of the exhaust.
- needle-type
- unidirectional controller
- body and regulation screw: 1/8, 1/4, 3/8, 1/2 = OT58
- Operating pressure 1 ÷ 10 bar
- Operating temperature 0 ÷ 80 °C
Downloads
News
Gruetzner G-LUBE
Cost-effective, reliable, safe and ecological. G-LUBE is an electronically controlled and single-point lubrication system, driven by a chemical reaction. The…
Gruetzner IND 220
The lightest portable induction heater in the world Avoid premature bearing failures due to damage caused by improper mounting!The workpiece…
Enidine Wire Rope Isolators for Vibration Isolation
High Performance Vibration Damping Look to Enidine for high performance vibration isolation components such as Wire Rope Isolators and Compact…
Tech-Con is the official distributor of AirTAC
We are the official distributor of AirTAC pneumatic components in Czech Republic. AirTAC International Group, headquartered in Taiwan, established in…
Enidine Adjustable Miniature Shock Absorber
Miniature Shock Absorbers for Limited Space Applications Enidine Adjustable Small Bore Hydraulic Series miniature shock absorbers offer the most flexible…
THK High Temperature LM Guide RSX-M1
Miniature LM Guide for use in temperatures as high as 150°C The Model RSX-M1 utilizes unique material, lubrication, and heat…
Kinetrol D-Line Damped Manual Fail-Safe
The D-Line damped manual fail-safe uses Kinetrol’s highly reliable, low stress, clock type spring linked to a torque multiplier to…
UR10e
Medium-sized, versatile cobot The UR10e is our medium duty industrial collaborative robot that combines both long reach and high payload.…
Flotronic® Barrel Unloading System
The Flotronic Barrel Unloading System combines our unique ‘One Nut’ Sanitary Air-Operated Double-Diaphragm Pump with our Barrel Unloading Skid; perfect…
Check out our online store
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.
Lorem ipsum dolor
Subscribe to our newsletter
Be the first one to find out about our latest products and solutions!
[mc4wp_form id="348"]